Hey and welcome to this tutorial where i will be showing you how to make a auto-turret(Unstable)
1. Spawn a prop (I like the blue barrel)
2. Place a Wire - Wheel ontop of it with the following settings
Forward: 1
No accelration: 0
Reverse: -1
Torque: 4400
Force Limit: 0
Friction: 14
Nocolide: (Mines checked but its up to you)3. Place a becon sensor on the side of the wheel with only 'Split X,Y,Z' Checked
4. Place a Target Finder on top of wheel with these settings
Min Range: 1
Max Range: MAX
Targets to track: 1
Bogeys: 1All the rest of options are up to you.
5. Place a sign gate (Gate - Arithmitic) ontop of wheel
6. Place a turret under the becon sensor
Now it should look like this
7. Wire Becon Sensor 'Target' to target finder 'Output:1'
8. Wire Sign gate 'A' to Becon sensor 'X'
9. Wire Wheel 'A:Go' to sign gate
10. Wire turret 'Fire' to sign gate
11. Unfreeze! and test.
